Moly Chain is designed to provide long-lasting
lubrication to reduce friction and wear on metal moving parts with
close tolerances such as chain drive, bushings, pins. It is suitable
for conveyor rollers, sprockets, cutter bars, chain saws, and all
types and forms of chain drives.
For Professional Use Only.
- Great adhesion, high cling formula
- Convenient aerosol with 360º spray tip
- High lubricity (Less friction, lasts longer)
- Can tolerate high or low operating temperatures
Surfaces must be dry and free of grease, oil, dirt, rust, wax, or
other forms of surface contamination
Use in a well ventilated area when temperatures are between 50
-90ºF (10-32ºC). Avoid spraying in very windy and dusty
Shake well before and during use. Hold can 10-16” from the
surface and spray in a steady back-and-forth motion and apply
an even, uniform film on all metal surfaces requiring lubrication.
Repeat as necessary. Do not apply to painted surfaces, plastic,
or parts made of rubber.
Vapors may ignite explosively. Keep away from heat, sparks and
flame. Extinguish all flames and pilot lights, heaters, electric
motors and other sources of ignition during use and until all
vapors are gone. Prevent buildup of vapors by opening all
windows and doors to achieve cross ventilation. Avoid contact
with eyes and skin.
Properly dispose of container and unused contents in
accordance with local, state and federal regulations.
Store in cool dry areas and protect from excessive heat.