Heavy Duty Break Cleaner uses special non-chlorinate solvent power to remove contaminants from brake
linings, drums, pads, cylinders and springs to ensure proper
braking function. This product dries quickly and leaves no
residue. This low VOC product is complaint nationwide.
For use on brakes, clutches, and engine componets
For Professional Use Only
- Dries quickly and leaves no residue
- Nationwide compliant VOC formula
- Removes heavy oil and grease residue
Use in a well ventilated area when temperatures are between 50
-90ºF (10-32ºC). Avoid spraying in very windy and dusty
Shake well before and during use. Hold can 10-16” from the
surface and spray in a steady back-and-forth motion. Spray
brake parts liberally and allow to run off. Allow to air dry or use a
soft wipe to clean the surface. Repeat as necessary. Protect
rubber and plastic parts. Do not spray on hot or warm surfaces.
Vapors may ignite explosively. Keep away from heat, sparks and
flame. Extinguish all flames and pilot lights, heaters, electric
motors and other sources of ignition during use and until all
vapors are gone. Prevent buildup of vapors by opening all
windows and doors to achieve cross ventilation. Avoid contact
with eyes and skin.
Properly dispose of container and unused contents in
accordance with local, state and federal regulations.
Store in cool dry areas and protect from excessive heat