Dry PTFE Lubricant is a dry, non-oily lubricant that
will not pick up dirt or dust. This PTFE formula provides excellent
lubrication that will not become gummy or melt below 500°. This
product is non-staining and contains no silicone and will not
interfere with paint adhesion.
For Professional Use Only.
- Non staining
- Does not attract dirt or dust
- Convenient aerosol with 360º spray tip
- Can be used on metal, wood, vinyl, or rubber
Surfaces must be dry and free of grease, oil, dirt, rust, wax, or
other forms of surface contamination
Use in a well ventilated area when temperatures are between 50
-90ºF (10-32ºC). Avoid spraying in very windy and dusty
Shake well before and during use. Hold can 10-16” from the
surface and spray in a steady back-and-forth motion and apply
an even, uniform film on all metal surfaces requiring lubrication.
Repeat as necessary.
Vapors may ignite explosively. Keep away from heat, sparks and
flame. Extinguish all flames and pilot lights, heaters, electric
motors and other sources of ignition during use and until all
vapors are gone. Prevent buildup of vapors by opening all
windows and doors to achieve cross ventilation. Avoid contact
with eyes and skin.
Properly dispose of container and unused contents in
accordance with local, state and federal regulations.
Store in cool dry areas and protect from excessive heat.